Modern interior doors1398580

Modern interior doors - it isn't just sound and warmth insulation space. It is a complete interior element, plays an essential ornamental value. Probably, these are generally guided and manufacturers to build materials, setting prices about the door. No, not that these were too much, but not low. But both desire to every detail in the interior matched. Those who will not have extra material means, but has a good taste, imagination as well as a great want to decorate your daily life, we'll demonstrate the way to perform finish interior doors using hands. Note that, almost certainly, except the doors will require your attention and door slopes, and, naturally, a door. Preparation for finishing interior doors

It doesn't matter what a way to finish you'll be pleased, the surface of the door leaf has to be prepared. While need: high quality adhesive composition, and tracing a physical object used as a press. To start with, the entranceway leaf have to be taken off its hinges and thoroughly search for stragglers places, cracks and voids. All loose parts of the top ought to be thoroughly and punctiliously cover with glue, cover the top with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated having an adhesive solution. When it comes to deep cracks ought to tinker a little longer. They are often finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Methods of finishing interior doors

The most straightforward methods to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry beds through the use of paint on it - the most commonly used method for updating the doorway leaf. We use aqueous solutions of organic or synthetic dyes. The result of this coating works as a current, more vivid take a look at the entranceway. The solution should be chosen, focusing on the main shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both options are well spread out and penetrate deep in the wood. Lakobeyts comes with an additional benefit - the composition and combines varnish and tinting base. Apply the coating might be using a brush, roller or spray. However, experts recommend the first option, arguing their opinion that when moving the comb parallel on the door structure from the fibers or varnish is applied more uniformly. For more aesthetic result of the door leaf is opened twice. Stain

In many cases, inside the finishing of the same door leaf at the beginning it really is helped by the stain, and then varnished. Stain allows to get the desired shade in the door, and coating improves the brightness in the texture. The subsequent grinding imparts matte canvas. If your matte surface at all just isn't satisfied, then after polishing is important to polish and dry. Because of this, interior door acquires luster and doesn't alter from those exhibited store.

veneering

Through the use of veneering old doors produced from wood shavings, sawdust or low-value timber, can discover a new life and search like expensive, elegant, high-quality product. The main requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made throughout the grain or diagonally.