Просмотр исходного текста страницы Purge and Trap for Autosamplers and Gas Chromatography8826516

Gas Chromatography (GC) is utilized to research compounds which can be vaporized without decomposing. To analyze these compounds, a gas chromatograph requires an autosampler whose injection mechanism meets the demands from the analysis. When 'abnormal' amounts of Volatile Organic Compounds (VOCs) or aroma compounds have to be analyzed, a purge and trap autosampler may be the optimal choice.


The Purge and Trap Process
Purge and trap autosamplers are equipped for detecting compounds at the lowest parts per billion (ppb) levels, hence their value for detecting dangerous compounds like volatile organic, or aroma compounds which could customize the taste or scent of an product. To arrange a specimen for chromatographic analysis, a purge and trap autosampler performs these process:
Bubbles carry gas from the sample to discharge the compounds
Sequesters the compounds inside the concentrator
Vaporizes the compounds by heating the concentrator
The vaporized compounds pass from the concentrator for the column-a collection of cylindrical tubing housed inside the column oven from the chromatograph-then they get through the detector, where they may be analyzed. In the event the analysis is completed, the outcomes are shown on a knowledge interface, and is printed by using a chart recorder.
Selecting the most appropriate [http://www.uboomerutv.com/uprofile.php?UID=2077380 automatic liquid sampler] and trap for Gas Chromatography is a component to the analysis of low-level compounds. Because of the essential nature with the application, choosing an autosampler with the appropriate capabilities is a concern. When looking for autosamplers who have a purge and trap concentrator, researchers look at the following criteria prior to an order:
Mechanical robustness- When laboratories process large volume samples, they want an autosampler whose technology can withstand the rigors with the sample injection process.
Analytical ability- In choosing an autosampler for that detection of low-level compounds, the key is to decide on the one which cuts down on potential for carryover between samples wherever possible.
Productivity- In purge and trap autosamplers, high productivity is defined with a dual concentrator mode that accommodates liquid and soil samples, and positioning for a great number of liquid and soil samples.
Simplicity of use- A user-friendly interface, intelligent software, and remote device typify an autosampler that is very easy to operate.
Ease of maintenance- On-board diagnostic checks, on-board real-time flow diagrams, and an error tracking and sample log make an autosampler easy to maintain.
When an autosampler receives high marks in every of the categories, it's considered superior to the competition.
Conclusion
Gas Chromatography is liable for the protection superiority various substances, from commercial soda pops to natural pond water. To detect low levels of volatile organic compounds or another compounds of these substances, a gas chromatograph needs an autosampler which includes a purge and trap concentrator. Generally, researchers pick the autosampler based on the criteria above, and sometimes consider purchasing it employed to lower your expenses.