Modern interior doors8897900

Modern interior doors - it's not just sound as well as heat insulation space. This is the complete interior element, plays an important ornamental value. Probably, they're guided and manufacturers to construct materials, setting prices about the door. No, not too these folks were too high, although not low. But both desire to everything from the interior matched. People who would not have extra material means, but includes a taste, imagination and a great want to decorate your lifetime, we'll demonstrate the way to perform finish interior doors using hands. Remember that, more than likely, except the doors will require your attention and door slopes, and, naturally, a door. Preparation for finishing interior doors

Whatever kind of a way to finish you will be pleased, the top of the door leaf have to be prepared. In the process of need: good quality adhesive composition, and tracing a physical object used as a press. First of all, the threshold leaf has to be removed from its hinges and thoroughly search for stragglers places, cracks and voids. All loose areas of the surface must be thoroughly and thoroughly cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. Regarding deep cracks have to tinker longer. They sometimes are finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Types of finishing interior doors

The most simple approaches to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry doors through the use of paint about it - the most commonly used method for updating the door leaf. We use aqueous solutions of organic or synthetic dyes. The result of this coating represents an updated, more vivid check out the threshold. The answer must be chosen, emphasizing the first colour of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices are well spread out and penetrate deep in to the wood. Lakobeyts posseses an additional advantage - the composition and combines varnish and tinting base. Apply the coating can be having a brush, roller or spray. However, it's advocated the first option, arguing their opinion any time moving the toothbrush parallel to the door structure from the fibers or varnish is applied more uniformly. For more aesthetic response to the doorway leaf is opened twice. Stain

Quite often, in the finishing of the same door leaf at the start it's treated with the stain, and then varnished. Stain allows to own desired shade from the door, and coating increases the brightness of the texture. The subsequent grinding imparts matte canvas. When the matte surface at all is not satisfied, then after polishing is essential to polish and dry. Therefore, interior door acquires luster and does not alter from those exhibited store.

veneering

Through the use of veneering old doors produced from wood shavings, sawdust or low-value timber, can discover a brand new life and look like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made over the grain or diagonally.