Modern interior doors230983

Modern interior doors - it's not just sound and also heat insulation space. This is a complete interior element, plays an important ornamental value. Probably, they are guided and manufacturers to build materials, setting prices around the door. No, not really that we were holding too much, but not low. But both wish to every piece of information in the interior matched. People that don't have extra material means, but has a taste, imagination plus a great wish to decorate your daily life, we'll demonstrate the best way to perform finish interior doors with their hands. Note that, most likely, except the doors requires your attention and door slopes, and, of course, an entrance. Preparation for finishing interior doors

Whatever a strategy to finish you may be pleased, the top of the door leaf has to be prepared. While need: excellent adhesive composition, and tracing an item utilized as a press. To start with, the entranceway leaf should be taken off its hinges and carefully search for stragglers places, cracks and voids. All loose parts of the top ought to be thoroughly and thoroughly cover with glue, cover the highest with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with the adhesive solution. Regarding deep cracks have to tinker more time. They can be finely dispersed sawdust filled, mixed with a furniture polish or construction glue.

Types of finishing interior doors

The most simple solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry chairs by making use of paint onto it - probably the most commonly used way of updating the entranceway leaf. We use aqueous solutions of organic or synthetic dyes. Caused by this coating works as an up-to-date, more vivid look at the threshold. The perfect solution should be chosen, focusing on the initial shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both option is well disseminate and penetrate deep into the wood. Lakobeyts posseses an additional benefit - the composition and combines varnish and tinting base. Use the coating could be using a brush, roller or spray. However, it's advocated the initial option, arguing their opinion any time moving the brush parallel on the door structure with the fibers or varnish is used more uniformly. For additional aesthetic results of the threshold leaf is opened twice. Stain

Frequently, from the finishing of the same door leaf at the beginning it's addressed with the stain, and after that varnished. Stain allows to own desired shade of the door, and coating increases the brightness in the texture. The next grinding imparts matte canvas. If the matte surface at all is not satisfied, then after polishing is necessary to shine and dry. Because of this, interior door acquires luster and change from those exhibited on the shelves.

veneering

By making use of veneering old doors made out of wood shavings, sawdust or low-value timber, can discover a new life and appearance like expensive, elegant, high-quality product. The key requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made over the grain or diagonally.