Modern interior doors478039

Modern interior doors - it isn't just sound and heat insulation space. This is the complete interior element, plays a significant ornamental value. Probably, they are guided and manufacturers of building materials, setting prices around the door. No, not too these were too much, but not low. But both need to every piece of information within the interior matched. Those who would not have extra material means, but includes a taste, imagination along with a great need to decorate your daily life, we'll demonstrate how to perform finish interior doors using their hands. Note that, more than likely, except the doors will demand your attention and door slopes, and, obviously, an entrance. Preparation for finishing interior doors

Regardless of what kind of a approach to finish you will end up pleased, the top door leaf has to be prepared. While need: top quality adhesive composition, and tracing an item utilized as a press. First of all, the doorway leaf have to be taken off its hinges and thoroughly pay attention to stragglers places, cracks and voids. All loose aspects of the top must be thoroughly and carefully cover with glue, cover the very best with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated having an adhesive solution. In the matter of deep cracks must tinker a little longer. They are often finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Methods of finishing interior doors

The simplest approaches to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry portraits by utilizing paint into it - probably the most popular way of updating the door leaf. We use aqueous solutions of organic or synthetic dyes. The result of this coating represents an up-to-date, more vivid look at the door. The answer should be chosen, focusing on the first shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices are well disseminate and penetrate deep into the wood. Lakobeyts comes with an additional benefit - the composition and combines varnish and tinting base. Apply the coating can be having a brush, roller or spray. However, experts recommend the first option, arguing their opinion that after moving the brush parallel to the door structure with the fibers or varnish is used more uniformly. For further aesthetic result of the entranceway leaf is opened twice. Stain

Very often, in the finishing of the same door leaf at the beginning it's helped by the stain, after which varnished. Stain allows to achieve the desired shade in the door, and coating raises the brightness with the texture. The next grinding imparts matte canvas. When the matte surface at all is just not satisfied, then after polishing is important to shine and dry. As a result, interior door acquires luster and will not differ from those exhibited available.

veneering

Through the use of veneering old doors made out of wood shavings, sawdust or low-value timber, will get a new life and appear like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made through the grain or diagonally.