Modern interior doors43433

Modern interior doors - it is not just sound and also heat insulation space. This is a complete interior element, plays an essential ornamental value. Probably, these are generally guided and manufacturers of building materials, setting prices around the door. No, not we were holding too high, but not low. But both need to every detail inside the interior matched. People who would not have extra material means, but has a taste, imagination plus a great wish to decorate your health, we'll demonstrate the best way to perform finish interior doors with their hands. Remember that, most likely, except the doors will require your attention and door slopes, and, of course, a door. Preparation for finishing interior doors

No matter what a cute strategy to finish you may be pleased, the top of the door leaf have to be prepared. When need: good quality adhesive composition, and tracing a physical object utilized as a press. To begin with, the doorway leaf have to be taken off its hinges and punctiliously look for stragglers places, cracks and voids. All loose areas of the top should be thoroughly and punctiliously cover with glue, cover the top with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated having an adhesive solution. Regarding deep cracks must tinker a little longer. They can be finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Types of finishing interior doors

The most simple approaches to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry beds by applying paint on it - essentially the most widely used method for updating the threshold leaf. We use aqueous solutions of organic or synthetic dyes. The consequence of this coating represents a current, more vivid check out the doorway. The solution should be chosen, concentrating on the main shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both options are well distributed and penetrate deep into the wood. Lakobeyts comes with a additional benefit - the composition and combines varnish and tinting base. Apply the coating may be with a brush, roller or spray. However, it's advocated the first option, arguing their opinion any time moving the brush parallel for the door structure of the fibers or varnish is used more uniformly. For more aesthetic results of the doorway leaf is opened twice. Stain

Frequently, inside the finishing of the door leaf in the beginning it is given the stain, then varnished. Stain allows to offer the desired shade of the door, and coating improves the brightness from the texture. The next grinding imparts matte canvas. In the event the matte surface without any reason isn't satisfied, then after polishing is important to shine and dry. As a result, interior door acquires luster and will not differ from those exhibited on the shelves.

veneering

Through the use of veneering old doors created from wood shavings, sawdust or low-value timber, can discover a brand new life and look like expensive, elegant, high-quality product. The main requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made over the grain or diagonally.