Modern interior doors3854652

Modern interior doors - it is not just sound as well as heat insulation space. This is the complete interior element, plays a significant ornamental value. Probably, these are generally guided and manufacturers to construct materials, setting prices for the door. No, not that we were holding too much, however, not low. But both desire to everything in the interior matched. People that do not have extra material means, but carries a good taste, imagination and a great need to decorate your life, we'll demonstrate how to perform finish interior doors using their hands. Note that, almost certainly, except the doors will demand your attention and door slopes, and, obviously, an entrance. Preparation for finishing interior doors

It doesn't matter what kind of a approach to finish you may be pleased, the top of the door leaf has to be prepared. While need: top quality adhesive composition, and tracing an object used as a press. To start with, the threshold leaf has to be taken off its hinges and carefully look for stragglers places, cracks and voids. All loose parts of the counter must be thoroughly and punctiliously cover with glue, cover the highest with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. When it comes to deep cracks must tinker longer. They are often finely dispersed sawdust filled, blended with a furniture polish or construction glue.

Ways of finishing interior doors

The simplest solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry furniture by making use of paint about it - one of the most widely used method for updating the threshold leaf. We use aqueous solutions of organic or synthetic dyes. The result of this coating works as an up-to-date, more vivid take a look at the entranceway. The perfect solution is needs to be chosen, emphasizing the first color of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices well spread out and penetrate deep in the wood. Lakobeyts posseses an additional benefit - the composition and combines varnish and tinting base. Use the coating may be with a brush, roller or spray. However, it's advocated the 1st option, arguing their opinion that after moving the brush parallel towards the door structure of the fibers or varnish is applied more uniformly. For additional aesthetic result of the doorway leaf is opened twice. Stain

Frequently, from the finishing the exact same door leaf from the outset it is given the stain, then varnished. Stain allows to offer the desired shade from the door, and coating improves the brightness from the texture. The next grinding imparts matte canvas. If the matte surface without any reason is just not satisfied, then after polishing is necessary to polish and dry. Consequently, interior door acquires luster and does not change from those exhibited store.

veneering

By using veneering old doors made from wood shavings, sawdust or low-value timber, will find a fresh life and look like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made across the grain or diagonally.