Modern interior doors7710021

Modern interior doors - it's not only sound and also heat insulation space. This is a complete interior element, plays a crucial ornamental value. Probably, these are guided and manufacturers of building materials, setting prices for the door. No, not these folks were too high, however, not low. But both wish to every piece of information inside the interior matched. People who would not have extra material means, but features a good taste, imagination plus a great desire to decorate your lifetime, we'll explain to you how you can perform finish interior doors using their hands. Remember that, more than likely, except the doors requires your attention and door slopes, and, naturally, a doorway. Preparation for finishing interior doors

It doesn't matter what kind of a approach to finish you may be pleased, the surface of the door leaf have to be prepared. When need: good quality adhesive composition, and tracing an item used as a press. To begin with, the doorway leaf must be taken from its hinges and thoroughly look for stragglers places, cracks and voids. All loose aspects of the counter must be thoroughly and punctiliously cover with glue, cover the very best with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. Regarding deep cracks have to tinker a little longer. They are generally finely dispersed sawdust filled, mixed with a furniture polish or construction glue.

Ways of finishing interior doors

The simplest ways to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry portraits by utilizing paint about it - probably the most frequently used means for updating the doorway leaf. We use aqueous solutions of organic or synthetic dyes. The consequence of this coating works as an up-to-date, more vivid check out the doorway. The solution ought to be chosen, emphasizing the initial shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices well distributed and penetrate deep to the wood. Lakobeyts has an additional benefit - the composition and combines varnish and tinting base. Apply the coating may be with a brush, roller or spray. However, it's advocated the very first option, arguing their opinion that after moving the brush parallel to the door structure with the fibers or varnish is used more uniformly. For additional aesthetic response to the threshold leaf is opened twice. Stain

Very often, within the finishing of the same door leaf at the start it really is given the stain, after which varnished. Stain allows to achieve the desired shade from the door, and coating improves the brightness in the texture. The following grinding imparts matte canvas. If your matte surface without any reason just isn't satisfied, then after polishing is critical to polish and dry. Because of this, interior door acquires luster and doesn't differ from those exhibited in the shops.

veneering

Through the use of veneering old doors made out of wood shavings, sawdust or low-value timber, will find a new life and appear like expensive, elegant, high-quality product. The principle requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made over the grain or diagonally.