Modern interior doors7600494

Modern interior doors - it is not just sound and heat insulation space. This is the complete interior element, plays an important ornamental value. Probably, these are guided and manufacturers of creating materials, setting prices about the door. No, not that these folks were too much, but not low. But both desire to every detail within the interior matched. Those who do not have extra material means, but features a good taste, imagination along with a great want to decorate your health, we'll explain to you the way to perform finish interior doors making use of their hands. Observe that, almost certainly, except the doors requires your attention and door slopes, and, of course, an entrance. Preparation for finishing interior doors

No matter what kind of a approach to finish you'll be pleased, the top of the door leaf have to be prepared. When need: good quality adhesive composition, and tracing an object utilized as a press. To begin with, the doorway leaf has to be taken out of its hinges and carefully look for stragglers places, cracks and voids. All loose parts of the counter must be thoroughly and punctiliously cover with glue, cover the highest with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with the adhesive solution. In the matter of deep cracks have to tinker a little longer. They are often finely dispersed sawdust filled, mixed with a furniture polish or construction glue.

Ways of finishing interior doors

The simplest solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry pictures through the use of paint about it - essentially the most popular way of updating the entranceway leaf. We use aqueous solutions of organic or synthetic dyes. The consequence of this coating works as an up-to-date, more vivid take a look at the entranceway. The answer should be chosen, concentrating on the original shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both option is well spread out and penetrate deep in to the wood. Lakobeyts posseses an additional advantage - the composition and combines varnish and tinting base. Apply the coating may be which has a brush, roller or spray. However, experts recommend the initial option, arguing their opinion any time moving the brush parallel on the door structure of the fibers or varnish is applied more uniformly. For additional aesthetic results of the threshold leaf is opened twice. Stain

In many cases, in the finishing the exact same door leaf in the beginning it is given the stain, after which varnished. Stain allows to offer the desired shade from the door, and coating improves the brightness of the texture. The next grinding imparts matte canvas. If the matte surface at all isn't satisfied, then after polishing is necessary to shine and dry. Consequently, interior door acquires luster and doesn't alter from those exhibited in the shops.

veneering

By utilizing veneering old doors made from wood shavings, sawdust or low-value timber, will get a new life and search like expensive, elegant, high-quality product. The key requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made throughout the grain or diagonally.