Modern interior doors7776300

Modern interior doors - it's not only sound and warmth insulation space. This is the complete interior element, plays an essential ornamental value. Probably, these are guided and manufacturers of creating materials, setting prices around the door. No, not too they were too much, and not low. But both desire to every detail inside the interior matched. People that will not have extra material means, but features a taste, imagination along with a great need to decorate your daily life, we'll show you how to perform finish interior doors making use of their hands. Observe that, almost certainly, except the doors requires your attention and door slopes, and, needless to say, an entrance. Preparation for finishing interior doors

Whatever a method to finish you will be pleased, the top of door leaf should be prepared. While need: high quality adhesive composition, and tracing an item utilized as a press. First of all, the threshold leaf has to be taken off its hinges and thoroughly check for stragglers places, cracks and voids. All loose elements of the counter needs to be thoroughly and carefully cover with glue, cover the top with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with the adhesive solution. Regarding deep cracks must tinker a little longer. They sometimes are finely dispersed sawdust filled, blended with a furniture polish or construction glue.

Types of finishing interior doors

The simplest ways to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry panels through the use of paint on it - one of the most commonly used way for updating the doorway leaf. We use aqueous solutions of organic or synthetic dyes. The result of this coating serves as an updated, more vivid take a look at the door. The perfect solution should be chosen, concentrating on the original shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both option is well spread and penetrate deep to the wood. Lakobeyts comes with a additional advantage - the composition and combines varnish and tinting base. Use the coating could be using a brush, roller or spray. However, it's advocated the initial option, arguing their opinion that when moving the comb parallel to the door structure of the fibers or varnish is used more uniformly. For additional aesthetic results of the entranceway leaf is opened twice. Stain

Frequently, within the finishing of the door leaf in the beginning it's given the stain, and after that varnished. Stain allows to achieve the desired shade in the door, and coating improves the brightness in the texture. Another grinding imparts matte canvas. When the matte surface at all is just not satisfied, then after polishing is necessary to shine and dry. Therefore, interior door acquires luster and doesn't vary from those exhibited on the shelves.

veneering

By using veneering old doors made out of wood shavings, sawdust or low-value timber, will get a new life and search like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made throughout the grain or diagonally.