Modern interior doors2009960

Modern interior doors - it isn't just sound and warmth insulation space. This is a complete interior element, plays a significant ornamental value. Probably, they are guided and manufacturers to build materials, setting prices about the door. No, not too we were holding excessive, and not low. But both want to every piece of information in the interior matched. Those that do not have extra material means, but features a good taste, imagination plus a great wish to decorate your daily life, we'll demonstrate the best way to perform finish interior doors using hands. Note that, probably, except the doors requires your attention and door slopes, and, of course, an entrance. Preparation for finishing interior doors

Whatever a cute method to finish you may be pleased, the top of the door leaf must be prepared. While need: good quality adhesive composition, and tracing an object utilized as a press. First of all, the entranceway leaf should be taken from its hinges and carefully pay attention to stragglers places, cracks and voids. All loose areas of the outer lining ought to be thoroughly and thoroughly cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated by having an adhesive solution. In the matter of deep cracks must tinker more time. They are generally finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Methods of finishing interior doors

The most simple solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry beds by making use of paint into it - the most widely used way of updating the door leaf. We use aqueous solutions of organic or synthetic dyes. Caused by this coating represents an updated, more vivid take a look at the entranceway. The perfect solution needs to be chosen, concentrating on the original hue of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both option is well spread out and penetrate deep to the wood. Lakobeyts comes with a additional benefit - the composition and combines varnish and tinting base. Make use of the coating might be having a brush, roller or spray. However, it's advocated the initial option, arguing their opinion any time moving the brush parallel for the door structure with the fibers or varnish is applied more uniformly. For additional aesthetic results of the doorway leaf is opened twice. Stain

Frequently, inside the finishing of the door leaf in the beginning it's given the stain, after which varnished. Stain allows to offer the desired shade from the door, and coating enhances the brightness in the texture. The subsequent grinding imparts matte canvas. If your matte surface without any reason is not satisfied, then after polishing is necessary to polish and dry. Consequently, interior door acquires luster and does not differ from those exhibited on the shelves.

veneering

Through the use of veneering old doors made out of wood shavings, sawdust or low-value timber, will get a fresh life and search like expensive, elegant, high-quality product. The main requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made across the grain or diagonally.