Modern interior doors7533596

Modern interior doors - it's not only sound and also heat insulation space. This is the complete interior element, plays an essential ornamental value. Probably, these are guided and manufacturers of building materials, setting prices for the door. No, not really that we were holding way too high, however, not low. But both need to all the details in the interior matched. Those that will not have extra material means, but features a good taste, imagination plus a great need to decorate your daily life, we'll teach you the way to perform finish interior doors with their hands. Note that, almost certainly, except the doors will demand your attention and door slopes, and, of course, a doorway. Preparation for finishing interior doors

It doesn't matter what a way to finish you will end up pleased, the surface of the door leaf must be prepared. In the process of need: good quality adhesive composition, and tracing a thing used as a press. To start with, the doorway leaf should be taken out of its hinges and thoroughly check for stragglers places, cracks and voids. All loose parts of the outer lining should be thoroughly and punctiliously cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated having an adhesive solution. Regarding deep cracks have to tinker more time. They can be finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Methods of finishing interior doors

The most straightforward methods to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry pictures through the use of paint about it - one of the most widely used way of updating the doorway leaf. We use aqueous solutions of organic or synthetic dyes. The effect of this coating acts as an up-to-date, more vivid view of the entranceway. The perfect solution should be chosen, centering on the original shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both options are well distributed and penetrate deep into the wood. Lakobeyts comes with a additional benefit - the composition and combines varnish and tinting base. Apply the coating could be using a brush, roller or spray. However, it's advocated the first option, arguing their opinion that after moving the toothbrush parallel for the door structure of the fibers or varnish is used more uniformly. For further aesthetic response to the door leaf is opened twice. Stain

In many cases, inside the finishing of the identical door leaf at the beginning it really is helped by the stain, then varnished. Stain allows to achieve the desired shade with the door, and coating improves the brightness of the texture. Another grinding imparts matte canvas. If the matte surface for any reason isn't satisfied, then after polishing is important to shine and dry. Therefore, interior door acquires luster and doesn't change from those exhibited store.

veneering

By utilizing veneering old doors made from wood shavings, sawdust or low-value timber, will get a brand new life and appear like expensive, elegant, high-quality product. The key requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made across the grain or diagonally.