Modern interior doors4791948

Modern interior doors - it is not just sound and warmth insulation space. This is a complete interior element, plays a crucial ornamental value. Probably, these are guided and manufacturers to build materials, setting prices for the door. No, not we were holding too much, and not low. But both need to all the details in the interior matched. Those that do not have extra material means, but includes a taste, imagination and a great need to decorate your lifetime, we'll demonstrate the best way to perform finish interior doors using their hands. Remember that, more than likely, except the doors requires your attention and door slopes, and, naturally, an entrance. Preparation for finishing interior doors

Regardless of what a cute method to finish you will end up pleased, the top door leaf must be prepared. In the process of need: top quality adhesive composition, and tracing a physical object utilized as a press. To begin with, the entranceway leaf should be taken out of its hinges and punctiliously look for stragglers places, cracks and voids. All loose aspects of the outer lining ought to be thoroughly and punctiliously cover with glue, cover the very best with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. When it comes to deep cracks must tinker longer. They are often finely dispersed sawdust filled, blended with a furniture polish or construction glue.

Methods of finishing interior doors

The most straightforward ways to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry furniture by applying paint about it - essentially the most popular way for updating the door leaf. We use aqueous solutions of organic or synthetic dyes. Caused by this coating represents an up-to-date, more vivid check out the entranceway. The perfect solution must be chosen, emphasizing the original hue of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices well distributed and penetrate deep to the wood. Lakobeyts comes with an additional advantage - the composition and combines varnish and tinting base. Make use of the coating can be which has a brush, roller or spray. However, it's advocated the initial option, arguing their opinion that whenever moving the brush parallel to the door structure in the fibers or varnish is used more uniformly. For further aesthetic response to the doorway leaf is opened twice. Stain

Very often, from the finishing of the same door leaf at the beginning it can be addressed with the stain, after which varnished. Stain allows to offer the desired shade from the door, and coating improves the brightness with the texture. The next grinding imparts matte canvas. If your matte surface without any reason just isn't satisfied, then after polishing is essential to polish and dry. Therefore, interior door acquires luster and doesn't change from those exhibited in the shops.

veneering

By using veneering old doors produced from wood shavings, sawdust or low-value timber, will get a new life and look like expensive, elegant, high-quality product. The principle requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made across the grain or diagonally.