Modern interior doors5446578

Modern interior doors - it is not just sound as well as heat insulation space. This is the complete interior element, plays an important ornamental value. Probably, these are guided and manufacturers of creating materials, setting prices for the door. No, not too they were too high, although not low. But both desire to all the details within the interior matched. Those that do not have extra material means, but has a good taste, imagination and a great wish to decorate your daily life, we'll explain to you the way to perform finish interior doors using their hands. Be aware that, probably, except the doors will demand your attention and door slopes, and, naturally, a doorway. Preparation for finishing interior doors

No matter what a approach to finish you will end up pleased, the surface of the door leaf has to be prepared. When need: excellent adhesive composition, and tracing a physical object used as a press. To begin with, the door leaf should be taken off its hinges and punctiliously look for stragglers places, cracks and voids. All loose parts of the surface should be thoroughly and punctiliously cover with glue, cover the highest with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated having an adhesive solution. In the case of deep cracks have to tinker a little longer. They sometimes are finely dispersed sawdust filled, blended with a furniture polish or construction glue.

Types of finishing interior doors

The simplest methods to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry cabinets by applying paint on it - probably the most widely used way for updating the threshold leaf. We use aqueous solutions of organic or synthetic dyes. The effect of this coating represents a current, more vivid look at the doorway. The answer needs to be chosen, emphasizing the original color of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices well distributed and penetrate deep in the wood. Lakobeyts comes with an additional advantage - the composition and combines varnish and tinting base. Apply the coating could be having a brush, roller or spray. However, it's advocated the very first option, arguing their opinion that after moving the comb parallel for the door structure of the fibers or varnish is applied more uniformly. For additional aesthetic consequence of the threshold leaf is opened twice. Stain

In many cases, within the finishing of the same door leaf at the start it really is treated with the stain, and then varnished. Stain allows to offer the desired shade in the door, and coating increases the brightness of the texture. The next grinding imparts matte canvas. In the event the matte surface without any reason just isn't satisfied, then after polishing is critical to shine and dry. Because of this, interior door acquires luster and will not vary from those exhibited on the shelves.

veneering

By using veneering old doors made out of wood shavings, sawdust or low-value timber, will get a whole new life and appear like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made throughout the grain or diagonally.