Modern interior doors2213174

Modern interior doors - it is not just sound and warmth insulation space. This is a complete interior element, plays an important ornamental value. Probably, these are guided and manufacturers of creating materials, setting prices about the door. No, not really that these folks were too much, but not low. But both wish to every piece of information within the interior matched. Those who will not have extra material means, but carries a good taste, imagination along with a great wish to decorate your lifetime, we'll teach you how you can perform finish interior doors using hands. Be aware that, almost certainly, except the doors will demand your attention and door slopes, and, of course, an entrance. Preparation for finishing interior doors

Whatever a cute way to finish you will end up pleased, the surface of the door leaf should be prepared. While need: high quality adhesive composition, and tracing a physical object used as a press. To begin with, the doorway leaf has to be removed from its hinges and thoroughly search for stragglers places, cracks and voids. All loose elements of the outer lining should be thoroughly and punctiliously cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated by having an adhesive solution. When it comes to deep cracks need to tinker a little longer. They are often finely dispersed sawdust filled, mixed with a furniture polish or construction glue.

Ways of finishing interior doors

The most simple methods to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry furniture by making use of paint onto it - essentially the most frequently used method for updating the threshold leaf. We use aqueous solutions of organic or synthetic dyes. The consequence of this coating acts as a current, more vivid take a look at the door. The solution must be chosen, emphasizing the main shade of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices well spread out and penetrate deep into the wood. Lakobeyts has an additional advantage - the composition and combines varnish and tinting base. Apply the coating might be having a brush, roller or spray. However, it's advocated the initial option, arguing their opinion that after moving the comb parallel on the door structure of the fibers or varnish is used more uniformly. For more aesthetic response to the doorway leaf is opened twice. Stain

In many cases, within the finishing of the same door leaf from the outset it's addressed with the stain, and then varnished. Stain allows to achieve the desired shade of the door, and coating raises the brightness of the texture. The following grinding imparts matte canvas. When the matte surface unconditionally is just not satisfied, then after polishing is critical to shine and dry. Therefore, interior door acquires luster and doesn't vary from those exhibited store.

veneering

By using veneering old doors produced from wood shavings, sawdust or low-value timber, can discover a brand new life and appear like expensive, elegant, high-quality product. The primary requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made over the grain or diagonally.