Modern interior doors4340905

Modern interior doors - it is not just sound and heat insulation space. This is the complete interior element, plays an important ornamental value. Probably, these are generally guided and manufacturers to construct materials, setting prices about the door. No, not too these folks were excessive, but not low. But both want to all the details inside the interior matched. People that do not have extra material means, but features a good taste, imagination along with a great wish to decorate your life, we'll show you the way to perform finish interior doors using their hands. Note that, more than likely, except the doors requires your attention and door slopes, and, naturally, a door. Preparation for finishing interior doors

Whatever kind of a way to finish you will be pleased, the top of the door leaf have to be prepared. While need: top quality adhesive composition, and tracing a thing used as a press. For starters, the threshold leaf has to be taken from its hinges and thoroughly look for stragglers places, cracks and voids. All loose aspects of the outer lining needs to be thoroughly and carefully cover with glue, cover the highest with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. In the matter of deep cracks must tinker a little longer. They are generally finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Types of finishing interior doors

The simplest solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish buy marquetry beds through the use of paint about it - the most widely used method for updating the entranceway leaf. We use aqueous solutions of organic or synthetic dyes. Caused by this coating represents an updated, more vivid take a look at the threshold. The answer ought to be chosen, focusing on the first hue of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both options are well spread out and penetrate deep in to the wood. Lakobeyts has an additional advantage - the composition and combines varnish and tinting base. Make use of the coating might be using a brush, roller or spray. However, experts recommend the very first option, arguing their opinion that when moving the comb parallel towards the door structure of the fibers or varnish is used more uniformly. To get more aesthetic response to the threshold leaf is opened twice. Stain

Quite often, in the finishing of the door leaf at the beginning it is treated with the stain, after which varnished. Stain allows to get the desired shade of the door, and coating enhances the brightness from the texture. The following grinding imparts matte canvas. If the matte surface for any reason just isn't satisfied, then after polishing is critical to polish and dry. Consequently, interior door acquires luster and will not alter from those exhibited store.

veneering

By using veneering old doors created from wood shavings, sawdust or low-value timber, will find a whole new life and appearance like expensive, elegant, high-quality product. The key requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made through the grain or diagonally.