Modern interior doors7111221

Материал из megapuper
Перейти к: навигация, поиск

Modern interior doors - it's not just sound and warmth insulation space. This is the complete interior element, plays an important ornamental value. Probably, they are guided and manufacturers to build materials, setting prices around the door. No, not these folks were way too high, and not low. But both need to every piece of information in the interior matched. People who do not have extra material means, but carries a taste, imagination plus a great wish to decorate your life, we'll teach you the best way to perform finish interior doors using their hands. Note that, probably, except the doors requires your attention and door slopes, and, needless to say, an entrance. Preparation for finishing interior doors

No matter what a cute method to finish you may be pleased, the top door leaf has to be prepared. While need: top quality adhesive composition, and tracing a thing utilized as a press. For starters, the threshold leaf should be taken from its hinges and punctiliously search for stragglers places, cracks and voids. All loose areas of the counter ought to be thoroughly and thoroughly cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. In the case of deep cracks must tinker a little longer. They can be finely dispersed sawdust filled, blended with a furniture polish or construction glue.


Strategies to finishing interior doors

The simplest solutions to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry doors by utilizing paint onto it - essentially the most commonly used way for updating the threshold leaf. We use aqueous solutions of organic or synthetic dyes. The effect of this coating works as an updated, more vivid check out the door. The answer needs to be chosen, centering on the first colour of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both options are well spread and penetrate deep in the wood. Lakobeyts posseses an additional benefit - the composition and combines varnish and tinting base. Apply the coating might be using a brush, roller or spray. However, it's advocated the 1st option, arguing their opinion any time moving the comb parallel towards the door structure from the fibers or varnish is used more uniformly. To get more aesthetic results of the door leaf is opened twice. Stain

Quite often, in the finishing the exact same door leaf in the beginning it is given the stain, and then varnished. Stain allows to get the desired shade with the door, and coating increases the brightness in the texture. The next grinding imparts matte canvas. If your matte surface for any reason just isn't satisfied, then after polishing is critical to shine and dry. As a result, interior door acquires luster and does not vary from those exhibited in the shops.

veneering

Through the use of veneering old doors produced from wood shavings, sawdust or low-value timber, can find a brand new life and search like expensive, elegant, high-quality product. The main requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made across the grain or diagonally.