Modern interior doors740942

Modern interior doors - it's not only sound and heat insulation space. This is a complete interior element, plays a crucial ornamental value. Probably, they are guided and manufacturers to construct materials, setting prices about the door. No, not that these were too high, but not low. But both need to every detail inside the interior matched. Those that will not have extra material means, but has a good taste, imagination and a great need to decorate your daily life, we'll explain to you how you can perform finish interior doors with their hands. Remember that, most likely, except the doors will require your attention and door slopes, and, needless to say, a doorway. Preparation for finishing interior doors

No matter what a strategy to finish you'll be pleased, the top of the door leaf should be prepared. While need: high quality adhesive composition, and tracing an object used as a press. First of all, the doorway leaf have to be taken off its hinges and carefully look for stragglers places, cracks and voids. All loose aspects of the counter needs to be thoroughly and carefully cover with glue, cover the most notable with tracing paper and flatten the press. Small cavities and cracks as perfectly eliminated with an adhesive solution. When it comes to deep cracks need to tinker a little longer. They can be finely dispersed sawdust filled, combined with a furniture polish or construction glue.

Types of finishing interior doors

The most straightforward ways to trim interior doors are:

-painting; -varnishing; -staining; -veneering; -decoupage; -craquelure.

Painting doors

Finish marquetry doors by applying paint into it - probably the most popular method for updating the entranceway leaf. We use aqueous solutions of organic or synthetic dyes. The effect of this coating serves as an updated, more vivid take a look at the threshold. The solution must be chosen, focusing on the first colour of the wood.

lacquering

For varnishing doors handyman prefer parquet lacquer or polish Lakobeyts. Both choices are well distributed and penetrate deep to the wood. Lakobeyts has an additional benefit - the composition and combines varnish and tinting base. Use the coating may be which has a brush, roller or spray. However, experts recommend the initial option, arguing their opinion any time moving the brush parallel for the door structure in the fibers or varnish is applied more uniformly. For more aesthetic response to the doorway leaf is opened twice. Stain

Frequently, in the finishing of the same door leaf at the start it is treated with the stain, and then varnished. Stain allows to achieve the desired shade from the door, and coating raises the brightness of the texture. The following grinding imparts matte canvas. When the matte surface for any reason is just not satisfied, then after polishing is essential to polish and dry. As a result, interior door acquires luster and doesn't differ from those exhibited in the shops.

veneering

Through the use of veneering old doors produced from wood shavings, sawdust or low-value timber, can discover a fresh life and appearance like expensive, elegant, high-quality product. The principle requirement - careful preparation of canvases, namely polishing. Directly sticker veneer made throughout the grain or diagonally.